Multi-storey residential tower
A full residential block modelled floor by floor, with balcony detailing, jaali screens and a dusk exterior render.
Home / Student work
The work you will be able to do.
Every project on this page was built by a learner at the Sector 14 centre — modelled, detailed and rendered in the same software the industry runs on.
Projects are credited by software and discipline. We are confirming permission with each maker before publishing names alongside their work.
Discipline
40 projects
Architecture & Interior Design
10 projects
Villa — night lighting study
Classical villa elevation taken through to an evening render, with external lighting placed and balanced.
Three-bedroom house — exterior
Brick-clad residence with cantilevered slabs and an external stair, rendered at sunset.
Contemporary residence
Two-storey house with car port, terrace and landscaped frontage, modelled and rendered in context.
Two-storey residence — front elevation
Front elevation study with balcony, boundary treatment and planting.
Residence with timber cladding
Massing and material study — timber banding against render, shown from the approach.
Residence — elevation study
Elevation worked up with glazing, railings and porch detail.
Working drawing set — first floor
Dimensioned first-floor plan with room names and a 3D view, issued on a titled sheet.
Working drawing set — ground and first
Ground and first floor plans with door and window marks, set out on a single sheet alongside the model.
Commercial tower — walkthrough
An animated approach to a curved-glass tower and its landscaped plaza, with the floor levels called out as the camera climbs.
Mechanical & Product Design
16 projects
Four-cylinder engine — assembly drawing
Piston, connecting rod and crankshaft modelled as parts, assembled, and documented as a drawing with a bill of materials.
Crankshaft and piston assembly
The same engine shown as a built assembly, with mates checked through the full rotation.
Muncaster steam engine — drawing sheet
A complete A2 sheet: detail views, an exploded sub-assembly, a bill of materials and manufacturing notes.
Muncaster steam engine — assembly
The finished engine assembled from its own machined parts, flywheel to cylinder.
Agricultural tractor
Full vehicle assembly — bonnet surfacing, wheels, canopy and decals, built as constrained components.
Cultivator implement
Frame, tines and three-point linkage modelled as a working assembly.
Office chair
Product model with upholstered surfaces, gas lift and castor base, presented in a rendered scene.
Wall-mounted fan
Blade, guard and motor housing modelled and assembled concentrically.
Hook and screw assembly
Lifting hook with threaded shaft, assembled with constraints and checked for interference.
Alloy wheel and tyre
Spoke geometry and tread pattern modelled, then rendered as a presentation image.
Model cannon assembly
Turned barrel, carriage and wheels built as parts and mated into a working assembly.
Military cargo truck
Six-wheel vehicle body, cab and load bed modelled and rendered.
Crankshaft assembly — motion study
The four-cylinder crank train animated through its stroke, so the phasing of the pistons can be checked against the throws.
Oscillating steam engine — motion study
The engine run through its cycle, with the cylinder rocking on its trunnion as the flywheel turns.
Bearing housing — exploded view
The housing taken apart and rebuilt, showing how the race, seals and cap go together.
Classic motorcycle
Full bike assembly — frame, tank, finned engine, chain drive, suspension and exhaust, rendered in an outdoor scene.
2D Drafting & Detailing
7 projects
Orthographic projection study
Orthographic views projected from an isometric with a mitre line, carrying hidden detail and overall sizes.
Cam profile plate
Profile built from tangent arcs between R15 and R90, with linear dimensions setting out the arc centres.
Six-lobe rotor plate
Rotor outline with six lobes set out on a R60 centre circle, around a keyed central hub.
Four-lobe link plate
Symmetrical plate with R15 and R10 lobes joined by R30 fillets, dimensioned from the centrelines.
Bolt-circle flange
Flange face set out by diameter — a bolt circle of holes around a central bore.
Four-hole cover plate
Cover plate outline with a central bore and four corner fixings, drawn from centrelines.
Tangent arc construction
Construction exercise in tangency: a chain of arcs from R4 to R30 meeting cleanly, dimensioned by radius throughout.
3D Printing & Prototyping
7 projects
Detailed bust
A bust printed on its own plinth, the colour shift coming off the filament rather than paint — a test of fine surface detail.
Motorcycle model
Printed in a wood-tone filament, with the frame, tank, engine and spoked wheels all resolved on the machine.
Puffer-jacket vase
A vase modelled as a padded jacket and printed through a pink-to-blue transition — overhangs and colour change in one run.
Textured handbag
A bag with a moulded pyramid face and its own printed name tag, finished with cord handles.
Hand-and-face sculpture
A sculptural piece printed in a stone-effect filament, plinth included.
Perforated monogram bag
A perforated face carrying a raised letter, printed flat and assembled with its trim and clips.
The print shelf
What the machine has turned out so far — vases, busts, planters and models, kept on the shelf at the centre.
Nothing here yet for that combination. Try a wider filter, or see everything.